Digitrax ZEPE Zephyr Express DCC Starter Set
New in unopened box
Zephyr Express Set Includes:
DCS52 All-In-One Throttle/Command Station/Booster to run your layout
PS314 Power supply to provide power to run your DCS52
One LT1 LocoNet Cable & Decoder Test Kit
Zephyr Express Quickstart Guide
Zephyr Express Manual
Digitrax Decoder Manual
Zephyr Express Offers:
Cost effective entry level LocoNet Compatible system
Color 2.4″ LCD Screen.
Large Backlit Keypad.
Speed control knob and direction switch with brake.
Integrated USB Computer Interface
Easy 2 and 4 digit addressing.
Smooth speed control.
Jump Ports for using DC power packs as additional throttles
Use one or two smooth DC power packs as throttles to control DCC equipped locomotives.
Simple, cost effective way to add more throttles to your Zephyr Express set.
Makes it easy to share the fun of DCC with layout visitors and young operators.
Functions on locos controlled by Jump throttles remain active.
Over 9000 Locomotive Addresses
Use Address 00 to run one or more locos without DCC decoders
Two Digit Addressing is easy to use. (Address 01-127)
Four Digit Addressing-use the number painted on your engines as its address.
3.0 Amps of Power to run multiple trains.
Run multiple trains at once without blocking!
Run up to 20 addresses at the same time on your system.
Run up to 20 throttles at the same time on your system.
Booster outputs 13V DC for safe operation in N and HO scales.
Control lights and sound with 29 functions (F0-F28)
Function 2 is a special non-latching key that can be used to sound the horn for as long as the key is held down.
Constant brightness lighting. Headlights can be directional or independently controlled (depending on decoder).
Stationary Decoders, Turnout Control & Turnout Position Reporting
Access to stationary decoder control for turnouts and other devices.
Control 2000+ stationary decoder addresses.
Universal consisting, Digitrax preferred method. ALL locos can be consisted, even analog locos.
Advanced consisting, allows only advanced consist capable mobile decoders.
Basic consisting, program decoders to run on same address.
Expandability with Digitrax LocoNet
Use Zephyr Express as a starting point for your Digitrax LocoNet System, then add components.
Use Zephyr Express as an expansion set with Digitrax equipment you already have installed.
Add Radio or IR via LocoNet. Just plug-in a UR90, or UR92 receiver and add IR and/or Radio throttles.
Built in read/write programmer that can read and write all CVs.
Supports Direct programming (Digitrax preferred method). Also supports paged & register mode programming.
Operations mode programming can be used to program decoders on the layout.
Blast Mode Programming for Sound
Comes Complete with DCS52 Command Station, PS314 Power Supply, LT1 LocoNet Cable and Decoder Tester, System Reference Manual and Decoder Manual.