Atlas 40 005 454 N Scale Finger Lakes GE B23-7 Diesel Locomotive #2309 DCC/Sound
🚚 FREE SHIPPING on $249+ (exclusions apply)
$185.00
ABOUT THIS PRODUCT
Condition: New
Atlas Gold Part #40 005 454
* N Scale
* Finger Lakes Railway
* Road #2309
* GE B23-7 Diesel Locomotive
* DCC and Sound Equipped
FIRST PHOTO IS A STOCK PHOTO THIS IS ROAD #2309
* New in original packaging
General Electric's "Dash 7" locomotive line was introduced as a replacement for the older "Universal-Series" of the 60s and early 70s. "Dash 7" series improvements included increased fuel efficiency, tractive effort and reliability. The B23-7 was a direct replacement for the 2,250HP U23B model. The first units were produced for Conrail in September, 1977 (ironically, 3 months after the last U23B was delivered to Conrail). Production continued through 1984, with a total of 535 units built. Conrail was the largest purchaser of the model, with a total fleet of 141 units.
Several features distinguished B23-7s from predecessor models. The long hood stepped outward in the area of the exhaust stack to accommodate a relocated oil cooler. In addition, the frame was 2 feet longer than that of the U23B. An FB-2 style truck was offered as standard equipment on B23-7s, but some railroads opted to use "trade-in" trucks. Therefore, AAR type B and Blomberg trucks could be found on some models. The six power assembly doors (located near the center of the long hood) indicated that the B23-7 was powered by a 12-cylinder GE FDL engine.
Features:
Directional lighting
Golden-white LEDs
Dual brass flywheels
Low-friction mechanism
Accurate painting and lettering
Factory-installed AccuMate® magnetic knuckle couplers
DCC Operation Features (GOLD LOCOMOTIVES ONLY)
Supports all DCC-programming modes
DCC includes RailCom and RailComPlus, with 14, 28 or 128 speed steps and with 2-digit and 4-digit addressing.
Flexible mapping of function keys F0 to F28.
A total of 6 DCC function outputs are available, and all can be function mapped (disable, brightness, light effects) individually
Follows all NMRA DCC standards and recommended practices.
ESU LokSound Features (GOLD LOCOMOTIVES ONLY):
Over 20 sound effects are available, including engine start-up and shutdown, prime mover sounds through all eight notches, bell, air horn, air compressor,
dynamic brakes and more.
There are up to 16 user-selectable horns, 2 user-selectable bells, and 2 user-selectable synchronized brake squeals.
Manual and Automatic Notching modes with the ability to change modes "on the fly" are provided for true realism.
Atlas Gold Part #40 005 454
* N Scale
* Finger Lakes Railway
* Road #2309
* GE B23-7 Diesel Locomotive
* DCC and Sound Equipped
FIRST PHOTO IS A STOCK PHOTO THIS IS ROAD #2309
* New in original packaging
General Electric's "Dash 7" locomotive line was introduced as a replacement for the older "Universal-Series" of the 60s and early 70s. "Dash 7" series improvements included increased fuel efficiency, tractive effort and reliability. The B23-7 was a direct replacement for the 2,250HP U23B model. The first units were produced for Conrail in September, 1977 (ironically, 3 months after the last U23B was delivered to Conrail). Production continued through 1984, with a total of 535 units built. Conrail was the largest purchaser of the model, with a total fleet of 141 units.
Several features distinguished B23-7s from predecessor models. The long hood stepped outward in the area of the exhaust stack to accommodate a relocated oil cooler. In addition, the frame was 2 feet longer than that of the U23B. An FB-2 style truck was offered as standard equipment on B23-7s, but some railroads opted to use "trade-in" trucks. Therefore, AAR type B and Blomberg trucks could be found on some models. The six power assembly doors (located near the center of the long hood) indicated that the B23-7 was powered by a 12-cylinder GE FDL engine.
Features:
Directional lighting
Golden-white LEDs
Dual brass flywheels
Low-friction mechanism
Accurate painting and lettering
Factory-installed AccuMate® magnetic knuckle couplers
DCC Operation Features (GOLD LOCOMOTIVES ONLY)
Supports all DCC-programming modes
DCC includes RailCom and RailComPlus, with 14, 28 or 128 speed steps and with 2-digit and 4-digit addressing.
Flexible mapping of function keys F0 to F28.
A total of 6 DCC function outputs are available, and all can be function mapped (disable, brightness, light effects) individually
Follows all NMRA DCC standards and recommended practices.
ESU LokSound Features (GOLD LOCOMOTIVES ONLY):
Over 20 sound effects are available, including engine start-up and shutdown, prime mover sounds through all eight notches, bell, air horn, air compressor,
dynamic brakes and more.
There are up to 16 user-selectable horns, 2 user-selectable bells, and 2 user-selectable synchronized brake squeals.
Manual and Automatic Notching modes with the ability to change modes "on the fly" are provided for true realism.
SHIPPING
Free Shipping is offered on orders $249 (exclusions apply). Some oversize items are NOT eligible for Free Shipping.
Orders ship within 1 business day unless otherwise specified. All shipments are professionally packaged to ensure safe transit to you.
Most orders ship via USPS Ground Advantage or UPS Ground, tracked and insured. Depending on the value of the shipment, signature confirmation may be required.
You will receive a tracking number once the shipping label has been generated so that you may track shipment progress.
RETURNS & SUPPORT
- View our Return Policy here.
- Get Product Support resources here.
- Questions? Contact us.