Train Control System TCS #1717 28x18mm Micro Speaker w/Enclosure
🚚 FREE SHIPPING on $249+ (exclusions apply)
$14.79
ABOUT THIS PRODUCT
Train Control Systems (TCS) Micro Speaker with Enclosure, Part #1717, 28mm x 18mm.
Key Details:
- Dimensions: 1.1" x 0.71" x 0.32" (28mm x 18mm x 8.1mm)
- Sound Pressure Level: 95 dB ± 3.0 dB at 1.2W, 10cm, 2.0 kHz
- Effective Frequency Band: 500 Hz to 20,000 Hz
- Power Rating: 1.2W (typical), 1.5W (peak)
- DC Impedance: 6 Ω ± 20% at 1.2W, 2000 Hz
This 28mm x 18mm speaker is a tough little beast capable of pumping out 1.2 Watts of clear and accurate audio. This micro speaker comes packaged inside a foam-padded enclosure to maximize the volume while preventing distortion caused by vibration. Truly an impressive speaker in a small package!
This speaker also comes from TCS with 6-inch (152mm) long 32AWG wire and a 2-pin JST "SR" connector. This connector can be clipped off if not needed, but can be readily plugged into some products such as the WM-MB1 and WM-MB2 motherboards.
- NOTE: TCS WOWSound decoders use an audio amplifier capable of supplying up to 2 Watts of power to an 8 Ohm load at maximum volume. The amplifier(s) on a WOWSound product can support speakers with impedance ratings as low as 4 Ohms. A reduction in impedance will result in more power being supplied to the speaker. This speaker is rated at 6 Ohms impedance and 1.2 Watts of continuous power. It is recommended that you set your master volume to ~60% or less to prevent over-driving and damage to your decoder or speaker.
---
NIGHTWATCH TRAINS buys and sells HO/N scale model trains, brass locomotives, DCC & sound systems, and model railroad accessories.
Key Details:
- Dimensions: 1.1" x 0.71" x 0.32" (28mm x 18mm x 8.1mm)
- Sound Pressure Level: 95 dB ± 3.0 dB at 1.2W, 10cm, 2.0 kHz
- Effective Frequency Band: 500 Hz to 20,000 Hz
- Power Rating: 1.2W (typical), 1.5W (peak)
- DC Impedance: 6 Ω ± 20% at 1.2W, 2000 Hz
This 28mm x 18mm speaker is a tough little beast capable of pumping out 1.2 Watts of clear and accurate audio. This micro speaker comes packaged inside a foam-padded enclosure to maximize the volume while preventing distortion caused by vibration. Truly an impressive speaker in a small package!
This speaker also comes from TCS with 6-inch (152mm) long 32AWG wire and a 2-pin JST "SR" connector. This connector can be clipped off if not needed, but can be readily plugged into some products such as the WM-MB1 and WM-MB2 motherboards.
- NOTE: TCS WOWSound decoders use an audio amplifier capable of supplying up to 2 Watts of power to an 8 Ohm load at maximum volume. The amplifier(s) on a WOWSound product can support speakers with impedance ratings as low as 4 Ohms. A reduction in impedance will result in more power being supplied to the speaker. This speaker is rated at 6 Ohms impedance and 1.2 Watts of continuous power. It is recommended that you set your master volume to ~60% or less to prevent over-driving and damage to your decoder or speaker.
---
NIGHTWATCH TRAINS buys and sells HO/N scale model trains, brass locomotives, DCC & sound systems, and model railroad accessories.
SHIPPING
Free Shipping is offered on orders $249 (exclusions apply). Some oversize items are NOT eligible for Free Shipping.
Orders ship within 1 business day unless otherwise specified. All shipments are professionally packaged to ensure safe transit to you.
Most orders ship via USPS Ground Advantage or UPS Ground, tracked and insured. Depending on the value of the shipment, signature confirmation may be required.
You will receive a tracking number once the shipping label has been generated so that you may track shipment progress.
RETURNS & SUPPORT
- View our Return Policy here.
- Get Product Support resources here.
- Questions? Contact us.
Train Control System TCS #1717 28x18mm Micro Speaker w/Enclosure
$14.79